1050 coated aluminum coil
Our 1050 coated aluminum coil belongs to commercially pure wrought family with a purity of 99.5% Aluminum and it is strengthened by cold working. It has excellent cold workability, braze-ability and solder-ability. Besides, it well suited to chemical and electrolytic brightening but not in casting.
► Capacity & Availability
√ AA 1050 O-H111
√ Thickness of 1050 coated aluminum coil: 0.08~6.0 mm (normally 1.0~3.0 mm, tolerance ±3%)
√ Mirach Coating's Max coating width: 2600 mm
√ Anti-nitric acid erosion property: Color difference: △Eab* ≤5.0
√ Coating for 1050 coated aluminum coil: PE (polyester) paint, PVDF coatings, Nano PVDF coatings, FEVE coatings
√ Paint brand: Normally PPG and Beckers / as requested
√ Coated colors: RAL, Pantone, NCS etc. or on request
√ Coating adhesive: not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)
► Chemical Composition of 1050 coated aluminum coil
alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Other |
1050 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
0.05 |
0.03 |
0.15 |
► Mechanical Properties of 1050 coated aluminum coil
Alloy Temper |
Specified |
Tensile strength |
Yield strength |
Elongation |
Thickness(mm) |
(MPa) |
(MPa) |
(%) |
|
1050-O/1050-H111 |
0.2-0.5 |
65-95 |
Min2 |
Min20 |
0.5-1.5 |
Min22 |
|||
1.5-3.0 |
Min26 |
|||
3.0-6.0 |
Min29 |
|||
6.0-12.5 |
Min35 |
|||
12.5-80.0 | ||||
1050-H12 |
0.2-0.5 |
85-125 |
Min65 |
Min2 |
0.5-1.5 |
Min4 |
|||
1.5-3.0 |
Min5 |
|||
3.0-6.0 |
Min7 |
|||
6.0-12.5 |
Min9 |
|||
12.5-40.0 |
Min9 |
|||
1050-H14 |
0.2-0.5 |
105-145 |
Min85 |
Min2 |
0.5-1.5 |
Min4 |
|||
1.5-3.0 |
Min5 |
|||
3.0-6.0 |
Min6 |
|||
6.0-12.5 |
||||
12.5-25 |
||||
1050-H16 |
0.2-0.5 |
120-160 |
Min100 |
Min1 |
0.5-1.5 |
Min2 |
|||
1.5-4.0 |
Min3 |
|||
1050-H18 |
0.2-0.5 |
Min140 |
Min120 |
Min1 |
0.5-1.5 |
Min2 |
|||
1.5-3.0 |
Min3 |
|||
1050-H22 |
0.2-0.5 |
85-125 |
Min55 |
Min4 |
0.5-1.5 |
Min5 |
|||
1.5-3.0 |
Min6 |
|||
3.0-6.0 |
Min11 |
|||
6.0-12.5 |
Min12 |
|||
1050-H24 |
0.2-0.5 |
105-145 |
Min75 |
Min3 |
0.5-1.5 | ||||
1.5-3.0 |
Min4 |
|||
3.0-6.0 |
Min5 |
|||
6.0-12.5 |
Min8 |
|||
1050-H26 |
0.2-0.5 |
120-160 |
Min90 |
Min2 |
0.5-1.5 |
Min3 |
|||
1.5-4.0 |
Min4 |
► Ordering & Packing
√ Weight per coil: 1~6 MT per coil as requested
√ Raw coil: both DC and CC are available
√ Coil OD.: max. 1750 mm
√ Packing for 1050 coated aluminum coil: protection and wooden pallets with fumigation for seaworthy
► Features & Applications
For its content above in the chemical composition chart, Mirach Coating's 1050 coated aluminum coil has high ductility and high reflective finish. Moreover, moderate strength and good anodizing quality enables our products has a wonderful application.
Our 1050 coated aluminum coils are widely used in ACP, honeycomb panel, insulation board, facades, window blinds, roller shutters, signage and so on.
► Contact UsDo you have any question or need any further information?
Our friendly and enthusiastic team are here to help and guide you through the many options available.
Simply drop us an e-mail or call us now, we’d be pleased to hear from you !
http://www.mirachcoatedal.com/